Our Products

Home / Trading / Structure Materials

Structure Materials

The Specific sizes in any kind of the section (MS Channels MS Angles, MS I Beam, RSJ Poles, MS Round Bars, MS Square Bars, MS Flat Bars, MS Serrated Flats) can be developed for inexpensive as well as the feasible quantity, in Mild Steel, High Tensile, En 8 / En 8D / EN 9 / EN 16 etc materials.


We supply a broad range of the Mild Steel (MS) Angels which are utilized for manufacturing of the truck-trailers, EOT cranes as well as the Gantry, escalators as well as elevators, the ship building, the factory sheds, the bus body, the communication as well as transmission towers, the conveyors, the boilers, agricultural equipment, as well as the construction of the bridges, the scaffolding as well as many more fabrication as well as engineering industries. I beams and H beams are extensively utilized in the construction industry to offer support for buildings as well as the load-bearing walls. They are accessible in a diversity of the standard sizes as well as chosen based on the applied load for the necessary application. Standard American types of beams, an aka Junior Beam, S Beam, or I Beams have tapering flanges for augmented strength of the flanges evaluates to the

Submission for I-Beams comprise:

  • Construction sustain beams for the profitable as well as residential construction
  • Support frames as well as columns for trolley ways, lifts as well as hoists
  • Mezzanines in addition to platforms
  • Trailer as well as the truck bed framing

H Beams are the Rolled steel with an H-shaped cross-section, equivalent thickness in the two similar flanges with no taper on the within surface. It is categorize into thin, medium, as well as the wide, based on the height as well as flange width.

Applications for the  H-Beams include:

  • Construction kind of the support beams for commercial as well as residential construction
  • Mezzanines as well as platforms
  • The Bridges
  • Trailer as well as  the truck bed framing
  • Machine bases

The H beam variety proffered by us is recognized for the rugged construction, just right finish, decay resistance, compact design as well as durability. Known for their lofty tensile strength as well as durability, these are obtainable in normal specifications for use in framing in all types of the  buildings-residential construction, as well as mezzanines, apart from  the bridges, truck as well as trailer bed framing.

A number of   their features that set them apart are:

  • Lofty tensile power
  • Anti-corrosive kind of  nature
  • Extremely durable
  • Dimensionally precise as well as perfect finish

Stainless Steel Sheets:

  • MOC: ASTM/ASME SA 240, 202, 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316H, 316L, 316 TI, 317, 317L, 321, 321H, 347, 347 H, 409, 410, 410S, 430 etc.
  • Finish: 2B, 2D, HR, CR, BA (No. 8 & No. 4), Satin (Met with Plastic Coated).
  • Hardness: Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
  • Size Range: 1000 mm x 2000mm, 1220mm x 2440mm, 4' x 8', 1250mm x 2500mm, 1500mm x 3000mm to 6000mm, 2000mm x 4000mm to 6000mm etc and many more.
  • Range Of Sheets: 0.5 MM to 5 MM + Thickness in Various sizes in Sheets, Coil etc.

The proffered angels are of the highest quality raw materials as well as observe with the standard international norms.

Send us an inquiry to get a price quote or know more about the product.